The guide to your pool maintenance

During the warm summer months, theswimming poolis a true haven of relaxation and pleasure. But to keep it a pleasant place,maintaining your poolis essential.

Are you wondering how to clean your shell pool ?
You've come to the right place! In the guide below, we'll explain the 9 steps involved in maintain your pool every week, to ensure healthy, clean water, whether you have an above-ground or in-ground pool.

For those in a hurry, feel free to directly download our guide in PDF format! Keep it in an easily accessible place so you don't miss a step (or several).

Manual cleaning of a swimming pool

1. Cleaning the edges

Cleaning the coping is the first step in the weekly maintenance of your pool. And for good reason, these are often exposed to dirt, dust, and sometimes, plant debris.

To remove accumulated dirt, use a suitable brush and a mild detergent. For greater efficiency, we recommend sweeping from the inside, from the edge side to the outside of the beach.

Regular cleaning of the coping stones is essential to prevent dirt accumulation and maintain an attractive and pleasant pool surround.

2. Cleaning the water line

The waterline of your pool is the place where the water meets the pool walls. This area is often prone to deposits of dirt, sunscreen, and organic residue.

Tocleana swimming pool's water line, do not use abrasive products, which can make your pool shell vulnerable afterwards. Prefer a specific cleaner or a mixture of water and vinegar. This will help eliminate unsightly stains. A non-abrasive cloth or sponge can also be used for agentle cleaning of the line.

Note that it is sometimes necessary to lower the water level to clear the water line.

3. Passing the landing net

Can't get rid of the leaves, insects, and other debris floating on the surface ofyour pool water? Nothing beats a good sweep with a skimmer net to remove floating debris!

Performed every week, a simplenettingcan prevent these debris from sinking to the bottom of the pool and becoming more difficult to remove. For greater efficiency, the net should be pushed slowly in an "S" motion.

4. Sweeping/vacuum cleaning

Thecleaning of the pool bottomis just as important as that of the surface. This is why using avacuum cleaneris essential to ensure your pool is clean.

If dirt particles have fallen to the bottom of the pool, use a broom or apool vacuumto remove them. Weekly cleaning of the pool bottom helps maintain clean and clear water.

Technical aspects of maintenance

1. Dosage of cleaning products

The dosage of the different chemical products is not to be taken lightly. Closely linked to the products used as well as to the coating of the pool, this dosage directly influences thebalance of the water of your pool. 

For theswimming pool water analysis, use test strips or an electronic tester to measure thepH level,chlorine, and other water parameters. Based on the results, add the necessary products to maintain optimal balance.

Be sure to follow the manufacturer's instructions carefully to avoid excess or deficiency of chemicals.

2. Disinfection of the pool

Disinfecting your pool is a key step in the maintenance of your pool. And for good reason, the use of treatment products such as chlorine, salt or bromine is essential to eliminate bacteria and unwanted microorganisms in thepool water. 

Every week, make sure to maintain an adequate level of disinfectant according to the size of your pool. If this is not the case, pour the disinfectant directly either into the pool, into the skimmers, or into an automatic regulation device. The same applies to the flocculant the pH regulator.

3. Cleaning the basket in the pre-filter of the filtration system

Thepump pre-filterof your pool is designed to trap debris before it reaches themain filtration system.

To prevent any obstruction that could lead to a reduction in water flow, remember to regularly clean the pre-filter basket. To do this, you must stop thefiltration systemand then close the inlet and outlet valves. Once the system has been cleaned, you can turn it back on.

4. Checking and cleaning the pool filter

Thepool filteris a vital component for maintainingclean water. Sand, cartridge, and diatomaceous earth filters are the most common types of filters.

They should be inspected regularly and cleaned depending on the level of dirt accumulated. A clean filter guarantees efficient filtration!

5. Pool water analysis

To conclude your weekly maintenance, carry out a complete analysis of thepool water. 

Check the pH, chlorine, and stabilizer levels. Disinfectants are effective when the pH level is correct, meaning it is between 6.8 and 7.2. Adjust themaintenance productsas needed to maintain optimal levels, which will ensure clear and balanced water.

By rigorously following these nine steps of water maintenance and treatment, you will maintain the quality of your water throughout the summer season. regular cleaning not only contributes to the cleanliness of thepool water, but also to the durability of your installation, thus extending its life. What could be better?