Pool technical room: everything you need to know

A pool equipment room is a storage space for the equipment needed to operate your pool (above-ground pools, in-ground pools, semi-in-ground pools, etc.). It is a technical room that must meet specific standards, but also be protected from external factors or damage. In this article, we will explain what a pool equipment room is and how to choose one for your project.

Swimming pool technical room: definition and uses

The technical room is the area near the pool where all the equipment used in a swimming pool is stored. It is also called a "pool room" or "technical room".

A technical room is a space used to store, repair, and maintain pool components such as pumps, the water heating system, filtration unit systems, and other types of water treatment machinery. It allows for the automatic regulation of the water level to prevent the risk of flooding. You can find, for example, a cover, a filtration pump, an electrolyzer, a hydraulic pool pump, and all the accessories for your pool.

A technical room is usually equipped with an air extractor, a cooling system, and a ventilation duct that allows access to the outside. The technical room is not a space intended to be used by swimmers, as it may contain technical equipment that could be dangerous for them.

The pool's technical room is a space equipped with a door. It is a sealed enclosure that protects the pool's filtration system as well as its heating system, automatic cover, or lighting.

In addition to helping save money, insulation also protects equipment from damage while maintaining low noise levels.

The technical room is generally located outside the pool area, sometimes 5 meters from the basin, and is therefore not accessible to swimmers. It may be located in a separate building or at the deep end of the pool, but in some cases, it can also be integrated into the pool itself.

Should a pool equipment room be insulated?

Yes, it is essential. Insulation helps to maintain a constant temperature in the room and avoid excessive heat loss in winter. In addition to helping save money, insulation also protects equipment from damage while keeping the noise level low.

There are three types of technical rooms: a room not connected to the house, a room connected to the garage or porch and open to the outside, and a room attached to the house.

However, it is important to note that insulation is not necessary in all cases. For example, if the equipment room is located inside your home or business and you do not have air conditioning, there may be no need for insulation.

What is the required surface area for a pool equipment room?

The size of the technical room for your swimming pool depends on several factors. Firstly, the type of heating system you have chosen for your pool. Secondly, if you wish to install an automatic cover. Thirdly, if you want an automatic cover.

The minimum dimensions are as follows:

1 m² for filtration and heating

0.7 m² for filtration, heating and lighting or automatic cover (unheated pool)

1.2 m² for filtration, heating and lighting or automatic cover (heated pool)

How do you hide a swimming pool technical room?

The equipment room can be hidden in various ways. Here are a few examples:

A garden shed

A garden shed can be used to hide the technical room. You can build a 2 m² structure that is 2.5 m high, with the door facing away from your swimming pool. If you already have a garden shed, simply move it closer to your pool and ensure it is in harmony with the house and other surrounding buildings.

A closet with little space

You will need to use a smaller filter, pump, and heater to fit in the space, but you can still have everything you need.

A garage or a basement

This is ideal if you have extra space! You can install a filter and pump of any size there, as well as a large area for other things like chairs and tables to entertain guests while they wait for the pool repair person (or another pool user).

The downside is that it could attract unwanted attention – someone who doesn’t know your little secret could break into your house when there is no one else at home!

How to protect a pool equipment room from freezing?

To protect your pool equipment room from freezing, you must first insulate it. Insulation will help prevent heat loss through the walls of your building and the floor.

Next, you must install a heating system that will keep your pool equipment room warm in winter.

Thirdly, you must install vapor barriers on all surfaces inside your building or greenhouse so that moisture does not come into contact with these surfaces and cause damage due to condensation.

You must then waterproof all exterior walls with appropriate sealing products before installing insulation materials, as this will prevent water from penetrating the cracks between the layers of insulation (which could lead to ice formation).

Furthermore, air circulation must be ensured through ventilation openings so that the humidity level in the rooms does not exceed acceptable limits in cold weather.

What are the best technical rooms for your swimming pool?

A pool technical room is a space used to house the pool's filtration, heating, and sanitation systems. Pool technical rooms can come in various shapes and sizes depending on your needs. There are different types of technical rooms, for example, the underground technical room and the above-ground room. The type of equipment you have dictates the size you need to purchase for your pool technical room.

The best equipment rooms, in terms of value for money, can be found on Aboral Shop. Do not hesitate to take a look by clicking right here: inexpensive equipment room.

How much does a pool equipment room cost?

The cost of a swimming pool equipment shed depends on what you want. The price can vary from 300 to over 1000 euros for a high-quality equipment shed. For example, if you do not want any special features in your equipment shed.

The price also depends on the time required to build the room and the skills of your builder or contractor. If they are experienced in building this type of room and have all the necessary tools, they will do the work faster than someone who has never done this type of work before.

Obviously, a technical room with a concrete slab or a pool house-style wooden structure will cost you much more. Expect between 100 and 300 euros per square meter for a kit construction. However, if you wish to have it custom-made, then prepare a budget of approximately 750 euros per square meter.